All About Vinyl
303 Products on Vinyl
An enlarged sideview of common vinyl fabric would show raw PVC (polyvinyl chloride) covered by a thin layer of plastic called the "topcoat". The topcoat is the part of the vinyl you can see and touch. To keep vinyl fabric soft and flexible, manufacturers add agents known as plasticizers to the raw PVC. A major function of the topcoat is to hold in these plasticizers, which otherwise would quickly evaporate. If the topcoat is damaged or degraded, plasticizers begin to escape leading to embrittlement/cracking/failure.
Protecting the topcoat, then, is the most crucial aspect of properly maintaining vinyl, and the subject with which vinyl manufacturers are most concerned. Vinyl manufacturers agree on and recommend the following.
General Cleaning
Never use household cleaners, powdered or other abrasives, steelwool or industrial cleaners, dry cleaning fluids, solvents (petroleum distillates), bleach or detergents. Using a medium-soft brush use 303 Aerospace Cleaner or 303 Convertible Top Cleaner if you don't have one of these colloidal cleaning products, try warm soapy water (such as Ivory soap), rinse completely with cool water then dry.
Mildew Stains
To kill the bacteria creating the mildew, use a medium-soft brush and vigorously brush the stained area with a 4 to 1 mixture of water and ammonia; rinse with cool water.
Tough Mildew Stains
Apply a mixture of one(1) teaspoon ammonia, one-fourth(1/4) cup hydrogen peroxide and three-fourths(3/4) cup of distilled water; rinse with cool water. Note: All cleaning methods must be followed by a thorough rinse with water.
Obviously abrasives should never be used on vinyl. Petroleum distillates are a universal "no-no" for both vinyl and rubber. Waxes should never be used on vinyl because (a) Most waxes contain petroleum distillates, (b) Wax is a build-up product, holding in the heat absorbed from the sun and accelerating heat damage.
Virtually all vinyl manufacturers agree that no type of oil should be used on vinyl. Silicone oil vinyl treatments should not be used for several reasons; 1) Silicone oil formulations typically attack the vinyl topcoat, 2) Silicone oil formulations usually contain no effective UV screening ingredients, 3) Silicone oil formulations are build-up products which accelerate heat damage, 4) Silicone oil formulations are greasy and oily, attract dust, and soil more quickly. READ THE LABEL! Product directions suggesting more than one coat for better cosmetic enhancement are build-up products and are recommended against by vinyl manufacturers.
303 for Vinyl
303 Aerospace Protectant is a beautifying liquid sunscreen, the routine use of which keeps vinyl looking like new while dramatically extending its useful life. 303 contains no petrochemicals, silicone oils or petroleum distillates. 303 is not a build-up product. 303 treated surfaces dissipate heat normally.
303 is not oily or greasy and does not attract dust. In fact, 303 treated vinyl repels dust, dirt and stains, stays cleaner longer and is much easier to clean when finally soiled. Since 303 contains a tested-safe-for-vinyl cleaner and is a cleaner and protector combined, pre-cleaners and pre-cleaning usually are not required.
303 has been tested and is recommended by major vinyl and vinyl accessory manufacturers. As the leader in UV screening technology since 1980, 303 is the most powerful UV screening treatment available for vinyl, leather, rubber, gelcoat fiberglass, and most plastics. Regular use of 303 can reduce UV caused slow-fade up to 100%
